- Home
- Browse
- General Equipment
- Miscellaneous
- Contech SRA-1000 Squeeze Roller Table (26136466)
Contech SRA-1000 Squeeze Roller Table
Listing Number: 26136466 | Concord, NH US | NH Department of Administrative Services 1 Seller's Other Auctions
Bidding on this item has ended
Missed out on this deal?
Get Notified When New Deals Near You Are Listed!
Unsubscribe Anytime
2908 Manual Contech.pdf
Auction Ended:
Final Bid:
$365.00
Bids:
22 Bids
Auction Details
| Starting Bid: $100.00 | |
| Current Price: $365.00 | |
| Buy Now Price | $0.00 | No Reserve Available for immediate purchase. |
| Buyer's Fee: 8.00% |
| Start Date | |
| End Date | [Extended] |
| Bid History | 22 Bid(s) |
| High Bidder | CustomProducts C************s |
| Page Views | 2934 |
Payment Details
Payment in full is due to Municibid no later than 5 working days after the close of the auction. Payment is accepted in the form of Electronic Fund Transfer, Wire Transfer, Credit Card and Certified Payment (Certified Check, Cashiers Check, or Money Order). Mailed payments must be postmarked no later than 2 working days from the date of the notice of award. Please note: It may take 2 to 3 days to process your payment once it is received. For full payment instructions please visit www.municibid.com/pay
Item Description
CONTECH OMEGA SQUEEZE ROLL APLICATOR (SRA) 1000 LAMINATOR
Hot or Cold Models Available
Variable Speed
Adjustable Pressure
Web Tension Control
Adjustable guides
Foot Switch Control
Options: Heat Bar Assembly, Loading Conveyor, Unloading Conveyor, Rubber Roller, Collar Roll Assembly (uninstalled but included in the sale).”
Operation
UNWIND STATION
The basic function of the Roll Unwind Stand is to support a roll of material and provide web tension during unwind process.
The 100 lb. Roll Unwind Station provides a support system for a maximum of 100 Lbs. The material is mounted to the unwind mandrel using tapered core inserts. The material is then routed into the DigiCutter.
UNWIND BRAKE
A material unwind brake is attached to the unwind mandrel support block. Aligning the slotted shaft on the unwind mandrel to the shaft in the Mandrel support block will interlock the material unwind mandrel with the material unwind brake.
Brake pressure is supplied to the brake by a precision regulator and gauge set. Turning the black knob clockwise will increase the pressure, while, turning the knob counterclockwise will decrease the pressure applied to the air brake.
DRIVE ROLLER
The Drive Roller is the roller that increments and measures the material. Roller position is provided to the control computer by an encoder attached to the Increment Drive Shaft. Acceleration, deceleration and, length information is calculated by the computer which, controls the DC drive card, powering the Increment Roller.
CUTTER BLADE
The Cutter Blade is the circular blade that travels the width of the machine, performing the cutting action.
The cutting system uses a pneumatic cylinder to provide blade movement. To perform a single cut, the pneumatic cylinder must travel the complete width of the machine. During the cut cycle, the blade is pushed from one end of the Cutter Head Support Tube to the other. An electrically activated 3-position 5-way pneumatic control valve directs the airflow into the cylinder. Located on the exhaust ports of the valve are adjustable flow mufflers that restrict the flow of air out of the cylinder. By restricting exhaust air of the cylinder, speed and force of the blade can be maintained throughout the entire cut cycle. Internally, a piston is forced back and fourth through the cylinder by airflow supplied by the control valve. Air is forced into opposite ends to move different directions. Limit Switches are mounted above the Cutter Head to provide position sensing. Two switches are used in the unit to provide end-of-travel limits for the actuator.
The coils are operated by 24-VDC outputs supplied at the I/O board. The electric valve operates by moving an internal spool that redirects airflow. The spool operates in one of three positions: left, center, and right. When a coil is activated, the spool is pushed into position and airflow is directed to the cylinder expelling the return air from the cylinder and driving the cutting blade.
NIP ROLLER
The Nip Roller is a movable roller used to keep the material in contact with the Drive Roller. The roller may be placed into the open position, allowing more access for material loading.
NIP ROLLER CONTROL
Placing the Nip Roller Open /Close switch in the Open (up) position will raise the Nip Roller to the full up position. Placing the switch in the Close (down) position will lower the Nip Roller. Nip Roller pressure is controlled by the pneumatic gauge and regulator set, turning the black knob labeled “Nip Pressure†will increase the pressure applied to the cylinders in the down position. Turning the knob counterclockwise will decrease the pressure.
Note:
Excessive nip pressure may temporarily bow the nip roller.
STATIC ELIMINATOR
The static eliminator option will reduce the effects of electrostatic charges generated with some materials. The eliminator consists of two parts. The control box, mounted inside the right sheet metal cover, generates the high voltage source required to reduce the static charge. The second component is a “Hot-Bar†located under the front guard near the top cutting blade. An ON/OFF switch is located on the Static Eliminator power supply.
Sold as is, where is with no expressed, implied guarantee or warranty. Items for pick up only.
Additional information on this Auction
| Will Item results be voted on | Unsure | |
| Will you ship this item | No. Pickup only. | |
| In person item inspection information | Item can be inspected 8 AM to 3 PM ET Monday through Friday. Call ahead to make appointment. Call Jason: (603) 271-5655 | |
| Pickup Location Details | 18 Smokey Bear Blvd. Concord, NH 03302 |
Questions/Answers Ask the seller a question about this auction.
You must be signed in to ask and answer questions.
Q: |
"What materials did you use the machine for. Do I understand correctly that the machine basically slits or cuts rolls of material" - Asked by #560134 01/31/2020 08:01 PM |
A: |
This machine was used by the State of NH DOT Bureau of Traffic to make highway and other road signs. The machine presses/pressed adhesive-backed reflective vinyl decal material onto assorted aluminum sign blank plates.
-Answered on 02/03/2020 04:07 AM |
Q: |
"What is he width capacity of the machine? thanks" - Asked by #4856469 02/03/2020 04:45 PM |
A: |
This machine accepts sheeting stock of up to 48" wide. This is the largest roll of sheeting that the sending agency could obtain through vendors such as 3M and Avery. Thanks
-Answered on 02/04/2020 05:34 AM |
Item location This location is a general area based on the sellers zip code. It is not the specific address where the item is located.
Our Buyers Fees
With Municibid, pricing is clear, up-front and transparent. A buyer's fee (% of the winning bid amount) will be charged directly to the winning bidder upon the close of each auction via the credit card you entered prior to placing the bid. You pay the selling agency directly for the full cost of the item. (unless otherwise noted)
All Buyers fee's are aggregate unless otherwise noted. This means after you cross certain price thresholds you will pay a different buyers fee for the remaining amount. See below for an example.
Example:
If buyers fee is 8% for bids up to $99,999.99, 5% for bids $100,000 - $499,999.99, and 4% for bids over $500,000.
- Winning bid: $50,000: = Buyers fee: $4,000 (8% of $50,000).
- Winning bid: $150,000: = Buyers fee: $10,500 (8% of $100,000 = $8,000) + (5% of $50,000 = $2,500).
- Winning bid: $550,000: = Buyers fee: $30,000 (8% of $100,000 = $8,000) + 5% of $400,000 = $20,000) + (4% of $50,000 = $2,000).
Where can I see what the buyers fee is?
The current buyers fee will always be shown on the page of the listing under the current price in both the bid area and auction details area. You will also see the buyers fee amount you will pay for your entered bid on the page where you confirm your bid.
What if the selling agency rejects my bid?
If the government agency rejects your bid (they reserve the right to do so) your buyer's fee will be returned, in full, to you within 5 days of notification to Municibid of the rejected bid by the governing body.
Bidding Increments
Please Note: Bid increments automatically adjust based on the level of the current bid. The increments are as follows:
| If amount is greater than or equal to | The bid increment will be |
| $0.00 | $1.00 |
| $100.00 | $10.00 |
| $500.00 | $25.00 |
| $1000.00 | $50.00 |
| $2500.00 | $100.00 |
FAIR WARNING ALL SALES ARE FINAL. You are legally obligated to pay for your item per the terms of the seller if you are the high bidder at the close of auction. If you do not pay for your item, you will not receive a refund of your buyer's final sale fee, you will no longer be permitted to bid on municibid.com and will be subject to a penalty of 40% of the winning bid amount. If your credit card is declined for insufficient funds, you will be charged a $50 fee.