Frink P87 Wing Plow

A Frink P87 Wing Plow with hydraulic cylinders, wire rope cables, plow and towers.

The 10 foot wing plow is 26 inches in the front and 36 inches in the rear.

The front and rear towers.  This was purchased in 2007.

Other features are:  Rear tower assembly is angled at 25 degrees away from the truck to distribute side wing plowing forces over a wide area thus reducing stress & wear on the beams;  a removable oil tank, removable front & rear tower;  main beam constructed from 8” I-Beam with left cylinder located behind the beam for protection and added strength;  vertical lift is achieved by a hydraulic cylinder & cable system sheaved to raise the wing into travel position or shelving purposes;  tower tilts with the front end hitch when servicing the vehicle;  tower incorporates an attach dee for the side wing which can be of a fixed or safety trip design;  the wing arm braces can be of a safety trip design incorporating a compression & tension spring or a standard fixed design; wing arms are adjustable in length and have universal joint connections at both ends of the arms; and the arms attach directly to the rear slider and wing attachment brackets.