2007 Big John Tree Spade International Truck

Application: Rigging-Oil Field,

Mission: Requested GVWR: 52000. Cals. GVWR: 52000 Calc. Start/Grade Ability: 22.50% / 1.37% @ 55 MPH Calc Geared Speed: 70.2 MPH

Fuel Economy: 7.75 mPG @ 55 MPH

Dimension: Whhelbase: 254.0, CA: 186.9, Axle to Frame: 98.0

Engine, Diesel: {International DT466 High Torque} 50 State, 245  hp, 680 lb-ft Torque @ 1400 RPM, 2400 RPM Governed Speed, # 2 Belt Housing

Transmission, Manual: {Fuller RT-8908LL} 10 Speed; With Double_Lo and Air shift

Clutch: {Eaton Fuller SAS1402} Two-Plated, Stamped Angle Spring; Ceramic, 14" Diameter, 7+1 Low Rate Damper, With 1.75" Spline, Mechanical Pull Type Control and With Kwik-Adjust Manual) Feature 860 lb-ft Torque Capacity

AXLE, Front non-driving: {Dana Spicer E-1202W} Wide Track, I-Beam Type, 12,000-lb Capacity

Axle, Rear, Tandem: {Dana Spicer DS405/RS406} Single Reduction 40,000-lb Capacity; With 200 Wheel Ends Gear Ratio: 4.11

CAB: Conventional

TIRE, Front: (2) 11R22.5 G149 RSA (Goodyear) 501 rev/mile, load range G 14 ply

TIRE, Rear: (8) 11R22.5 G164 RTD M+S (Goodyear) 499 rev/mile, load range G, 14 ply

SUSPENSION, REAR, TANDEM: (Hendrickson RT-403) Walking Beam Type 52" Axle Sopacing; 40,000-lb Capacity With Rubber Center Bushings

PAINT: Cab Schematic 100 GN Winter White