Missed out on this deal?
Unsubscribe anytime.
1995 American Rural Fire Equipment: Up fitter box system. HALE Model #CPB5, SN #119181 onboard pump system. Includes a 400GPM pump @ 100PSI, HALE foam-pack foam system, 2- side compartment power hose reels with 100' of of hose and nozzle. Total of 6 weather tight compartments, 3 per side. Pump panel in rear needs some work, several gauges leak but still function and 1-2 light bulbs are out / missing cover. Includes a Honda generator (see picture) and two tower scene lights. Aluminum hose bed with dividers. Body is in excellent condition, very little rust. Includes all PTO hoses, pump assembly, lighting controls, switches, control boxes. Unit worked when taken out of service, we no longer have a use for it. Loading assistance can be provided. We have some documents on the unit, however they are limited to operating manual and limited installation information. NOTE: This is being sold as is, where is. We do not guarantee the function of the unit and strongly recommend that the successful bidder contract with a professional installation company and pump testing company prior to using the unit.
Q: Are you able to load on a trailer?
A: Yes. Please note that the estimated weight is 6,000 LB. Our loading ability is limited to a flatbed trailer, as we will only load with a forklift.
Q: 2008 Ford F350 6.4L Superduty 4x4 Project, this would be a lot of work to convert..
A: OK... I do not know what it would take to convert it to your needs for your specific vehicle. We can only provide information on what it was installed on prior to removal. We are not an up-fitter shop or dealer, we suggest that if you have any doubts about this unit fitting your specific project that you do not place a bid on it.
Q: what truck chassis did this come off of. whats the measuremet from the front of the box to the center of the rear wheel weld? I see the fire pump in the picture, is this a PTO fire pump driven off the trucks engine, or does the fire box have an auxillary engine that powers the PTO fire pump?
A: Hello, This was installed on a 1995 Ford F-Superduty (F-450) dual rear wheel truck with an inner frame rail distance of 28" and an outer frame rail distance of 33.5". The distance from the front of unit (cab end) to the center of the wheel well is approximately 59". This fire pump was driven off of a hydraulic system loop that was driven off of a PTO pump that was connected to the vehicle transfer case. The entire PTO pump system is included and can be installed with a PTO kit on most transmissions that are designs to accept the system.
