2008 International Single Axle
Listing Number - 65945057
State College, PA US
| Ferguson Township
Bidding on this item has ended.
Missed out on this deal?
Get Notified When New Deals Near You Are Listed!
Unsubscribe Anytime

Auction Ended:
Final Bid:
$22,100.00
Bids:
67 Bids
Auction Details
Starting Bid: $2,500.00 | |
Current Price: $22,100.00 | |
Buy Now Price | $0.00 | Reserve Price Met Available for immediate purchase. |
Buyer's Fee: 9.00% |
Start Date | |
End Date | [Extended] |
Bid History | 67 Bid(s) |
High Bidder | Triplej T*****j |
Page Views | 2131 |
Payment Details
The Township accepts cash, bank/cashier's check, or credit card ( 3% fee added for credit card).
Item Description
VIN 1HTWCAZR18J644415
Model 7400 SBA 4X2
ESN 2U3009137, Model Code SA62500
GVWR 41000, Ignition Key Z013, Wheel Base 151.6 in / 385.0 cm, Gear Ratio 7.17, Recall Pending No
The frame is swelling and separating at multiple points due to rust build up. Truck is equipped with a Tenco 11ft front plow, 9ft wing plow, Buyers salt spreader and Asphalt tarp.
Additional Information on this Auction
Custom ID | PW3-45 | |
Will Item results be voted on | No | |
Will you ship this item | No. Pickup only. | |
In person item inspection information | Shane Kiessling At skiessling@twp.ferguson.pa.us | |
Does it start | Yes | |
Is it drivable off the lot | Yes | |
Is it currently inspected | No | |
Vehicle has a transferable title | Yes | |
Miles | 41057 | |
VIN | 1HTWCAZR18J644415 | |
Year | 2008 | |
Make | International | |
Model | 7400 | |
Body Style | Conventional | |
Engine Type | 7.6L L6 Diesel | |
Driveline | 4x2 |
Questions/Answers Ask the seller a question about this auction.
You must be signed in to ask and answer questions.
Q: |
"What reserve price ..how much" - Asked by #59643357 08/07/2025 12:15 AM |
A: |
It is our policy not to share the reserve price. Thanks
-Answered on 08/07/2025 07:36 AM |
Q: |
"Pics show signs of frame separation" - Asked by #566426 08/07/2025 03:24 PM |
A: |
We stated that in the description.
(edited on 08/27/2025 06:38 PM)
-Answered on 08/07/2025 03:46 PM |
Q: |
"What is the recall pending number about" - Asked by #59643357 08/09/2025 04:15 AM |
A: |
There are no recalls pending.
-Answered on 08/11/2025 07:38 AM |
Q: |
"Does the truck have any major issues other than rust" - Asked by #59643357 08/09/2025 04:16 AM |
A: |
No, it was just replace due to age, and was in use last winter for plowing.
-Answered on 08/11/2025 07:37 AM |
Q: |
"How many yards does the sander hold. please" - Asked by #61257069 09/02/2025 04:18 PM |
A: |
The legal limit is 8 tons or about 8 yards
-Answered on 09/02/2025 07:14 PM |
Q: |
"Do you know the GVWR and what the truck is legally rated to carry?" - Asked by #77621256 09/09/2025 09:41 PM |
A: |
According to the title the GVW is 41,000 and the inladen weight is 18,597
-Answered on 09/10/2025 07:22 AM |
Q: |
"Any history of frame rust near suspension mounts or crossmembers?" - Asked by #77621256 09/09/2025 09:41 PM |
A: |
Not that I am aware of. just the separation on the frame rail shown in the pictures.
-Answered on 09/10/2025 09:12 AM |
Q: |
"Plow & Spreader
Are the plow and spreader fully functional?
Do the controls in the cab work properly?
Any major rust on the plow frame or spreader housing?" - Asked by #77621256 09/09/2025 09:42 PM |
A: |
The plow and spreader are in good working condition! All the controls and ground speed work perfectly! No major rust on plow frame or spreader housing.
-Answered on 09/10/2025 09:15 AM |
Q: |
"Dump Body & Hydraulics
Does the dump bed raise and lower smoothly under load?
Are the hydraulic lines original or replaced? Any visible cracks or leaks?
Is the truck equipped with a PTO?" - Asked by #77621256 09/09/2025 09:44 PM |
A: |
Dump Body and Hydraulics work very smoothly both empty or loaded. Most of the hydraulic lines and fittings have been replaced. No cracks or leaks. Yes it is equipped with a PTO.
-Answered on 09/10/2025 09:21 AM |
Q: |
"What’s the frame rail spacing and wheelbase?" - Asked by #77621256 09/09/2025 09:45 PM |
A: |
Inside Frame rail is 34" The wheel base is 152"
-Answered on 09/11/2025 01:45 PM |
Q: |
"Has the CAT 3126 engine ever been rebuilt or had major work done (injectors, turbo, head gasket)?
Has the transmission ever been serviced or replaced?
Any known issues with the electrical system, hydraulics, or PTO?" - Asked by #77621256 09/09/2025 09:47 PM |
A: |
The only major work done was replacing the head gasket, there are no electrical or PTO issues.
-Answered on 09/10/2025 09:54 AM |
Q: |
"Can you get pictures of the frame and underside of the bed with the bed up Please?" - Asked by #28497285 09/14/2025 01:13 AM |
A: |
|