GVM Automatic Brine System

Brine system is a GVM E-Z Brine, automatic brine making system with a capacity of up to 3000 gallons per hour with proper fresh water supply.  This system includes a galvanized steel, skid mounted, automated brine production system, 1500+/- gallon poly salt hopper and related plumbing to install system.  This sale does not include a poly storage tank to store brine.  Recommended storage tank capacity is 5000 gallons.  This unit worked properly upon removal from service just prior to the sale and has been used every winter in our facility since purchase in November, 2011.  It is being replaced as a scheduled routine upgrade of our infrastructure.  The system will require a 2" fresh water line, one 30 amp, 240 volt single phase circuit, one 20 amp 120 volt circuit and one 90 psi air line to operate the system.  The pump has been replaced approximately four years ago and the VFD that controls the speed of the pump motor was replaced approximately 1 1/2 years ago. To inspect this equipment, please contact Tony Barbarino at 724-625-1636 Ext. 114 from 7:00 am- 3:00 pm weekdays or email  to tbarbarino@twp.pine.pa.us  Sale of equipment is scheduled for approval at the Board of Supervisors meeting on December 2, 2019, however, the Board reserves the right to reject any or all the bids at their descretion.  This equipment is sold on an AS-IS, WHERE-IS basis and has no written or implied warranties.  Equipment must be picked up within 7 days after notification of the Board of Supervisors approval of the sale.  There is no shipping option available for this equipment through the seller.  The equipment is located at the Township of Pine Municipal Building 230 Pearce Mill Road Wexford, PA 15090